|
(for information on pricing, please call 0800 558 055)
|
M3 /ENM
(with single lever mixer)
M3 /SNM (with dual tap mixer)
Small electric instantaneous water heater with open-outlet
single lever mixer as an economical means of supplying
hot water between approx.
35 °C and 50 °C to a
wash basin. The water is heated directly as it flows through
the heater, thus eliminating all heat losses and ensuring
that hot water is immediately available. The high-grade
mixer is supplied with flexible connecting hoses for straightforward
installation.
Pop-up waste available as an optional extra.
Description
- Small instantaneous water heater
with open-outlet single lever mixer for undersink installation
- Effective, easy-to-service
bare-element heating system
- Immediate supply of hot water without preheating and
without loss of heat
- Mains power cable approx. 70 cm long, with standard
plug
- Straightforward installation thanks to compact
size and flexible connecting hoses
Use
Single wash basins, e.g. in cloakrooms, sanitary rooms in offices, shops, restaurants
and surgeries
Comparative economy
The small instantaneous water heater M3 stands out through
its compact size and economical operation. The water is
heated directly as it flows through the heater. Hot water
is not stored and energy is not wasted in standby mode
as would otherwise be the case. The comparison clearly
shows the potential savings that can be realized with the
instantaneous water heater, since heat lost by a storage
heater can be greater than the energy required to wash
hands.
Appliance dimensions (cm) H13 X W19 X D7
Type & Capacity:-
M3 / SNM 3.5 kW
, 230 V, 15 A - approx 2 l/min (15-40°C)
M3 / ENM 3.5 kW , 230 V, 15 A - approx 2 l/min (15-40°C)
Product Information Sheet in PDF Format:
Back to top...
|
|
M4/SBM
(with special mixer)
Small electric instantaneous water heater with mixer as an economical means of supplying hot water between approx. 35 °C and 50 °C to a solitary wash basin. The water is heated directly as it flows through the heater, thus eliminating all heat losses and ensuring that hot water is immediately available. Thanks to the high-grade special mixer, the appliance can easily be connected to a 1/2" water connection.
Description
- Small instantaneous water heater with special mixer (open-outlet design) and a 16 cm swivel spout for above-table installation
- Effective, easy-to-service bare-element heating system
- Immediate supply of hot water without preheating and without loss of heat
- Mains power cable approx. 70 cm long (only M3/SMB with standard European plug)
Use
Solitary points of use, such as a wash basin or kitchen sink
Appliance dimensions (cm) H165 X W185 X D80
Type & Capacity:-
M4/SMB, 4.4 kW, 230 V, 19 A - approx 2.6 l/min (15-40°C)
Product
Information & Technical Manual see our download section.
Product Information Sheet in PDF Format:
Back to top... |
|
MDX 4
(electronic, closed outlet design)
Small electronic instantaneous water heater with highly-efficient bare-wire heating system for economic water supply to e.g. a handwash basin or a sink. The shapely small appliance heats the water automatically as it flows through it, without wasting energy in standby operation. The heating power is electronically controlled in order to ensure that the outlet temperature won't be exceeded (factory setting ca. 38°C). In combination with the economical flow rate the appliance ensures maximum energy efficiency.
Description
- Mini-sized electronic instantaneous water heater operates automatically by the flow
- Heating power controlled electronically for temperature stabilisation
Outlet temperature can be preset inside the unit between about 30°C and 50°C (factory setting 38°C)
- Flow adjustment control, preset for a temperature increase of 25 K
Effective bare-wire heating system IES for very quick response
- Double pole thermal cut-out protection
- Special jet regulator for use with screw threads M22/M24 included
- Connecting set to angle valve included
(T-piece and flexible pressure hose), except for type MDX 6-220
- Mains power cable approx. 65 cm long
- Inlet/outlet water connection 3/8"
Use
With standard taps for handwash basins and sinks
- also if low flow water pressure at installation site
- also suitable for reheating water e.g. in connection with solar heating systems
- also usable with a pillar mixer (without mixture of hot and cold water)
Product Information Sheet in PDF Format:
Back to top... |
| MDH 6 (closed outlet design, without mixer)
Electric mini instantaneous water heater with highly-efficient bare-wire heating
system for supplying hot water to a single point of use, i.e. one handwash
basin or sink. The attractive small appliance perfectly matches all wash basins
and heats the water automatically as it flows through it, without wasting energy
in standby operation. The economically set flow rate ensures maximum efficiency.
The heater can easily be installed directly to a standard mixing tap, our special
jet regulators guarantee efficient and economical flow results.
Description
- Mini-sized electric instantaneous water heater, operates automatically
by the water flow
- Water outlet via existing tap or mixer, CLAGE taps and accessories
recommended
- Effective bare-wire heating system for very quick response
- Flow adjustment control, preset for a temperature increase of 25 K
- No standby heat losses
- Double pole thermal cut-out protection
- Inlet/outlet water connection 3/8"
- Mains power cable approx. 70 cm long
Applications
Handwash basins, e.g. in toilet rooms, bathrooms, bedrooms, restaurants and
office buildings.
Kitchen sinks (only highest power rating recommended, depending on local supply
temperature)
Useful:
Installation is a simple matter with the connection set (T-piece and flexible
pressure hose) optionally available with types
MDE 6, MDH-C
Appliance dimensions (cm) H13 X W19 X D7
Type & Capacity:-
MD6 5.7 kW , 230 V, 25 A - approx 3.3 l/min (15-40°C)
Product Information Sheet in PDF Format:
Back to top... |
| CRX9
Electronically controlled instantaneous water heater with
tubular heating system for supplying hot water between
35 °C and 55 °C. The required temperature can be
selected via two touch keys. The heating power is controlled
electronically in order to obtain and roughly maintain
the set temperature. The flow rate can easily be adapted
via the integrated filter valve.
Description
- Compact, electronically controlled instantaneous water
heater
- Tubular heating system in copper tank
- Closed-outlet design with safety temperature limiter
- Heating power controlled electronically in accordance
with feed temperature and flow rate
- Control panel with LED indicator for setting the temperature
between 35 °C
and 55 °C
- Control knob for reducing the flow rate right down to
zero
- Variable electrical connections
- Variable water connection for surface-mounted or flush-mounted
installation
- Moderate flow rate of 7 l/min is required
Use
Singlepoint and multipoint use, e.g. sinks or wash basins
Appliance dimensions (cm) H33 X W21 X D9
Type & Capacity:-
CRX 9 8.8 kW , 230 V, 38 A - approx 5 l/min (20-45°C)
Product Information Sheet in PDF Format:
Back to top...
|
| CBX 13 (electronic)
Compact electronically controlled instantaneous water heater
with bare-element heating system for supplying hot water
between 35 °C and 55 °C to one
or two points of use. The required hot water temperature can be set via touch
keys. The heating power is controlled electronically in order to obtain and
maintain precisely the set temperature.
For undersink installation we recommend our models CBX 13-U.
Description
- Compact electronically-controlled instantaneous water
heater
- Two touchkeys and an LED display
for selecting temperatures between 35°C and
55°C
- Flow control adjustable down to
zero
- Short back panel for easy installation,
a choice of entry points for electrical connections,
and variable water connection pieces for surface or flush-mounted
installation
Use
- Shower cabin for economy and convenience (requires
a suitable shower attachment such as the CXH )
- Kitchen sinks
- Wash Basins
Appliance dimensions (cm) H33 X W21 X D9
Type & Capacity:-
CBX 13 13.5 kW , 400 V, 3 X 20A - approx 2 l/min (35-55°C)
Product Information Sheet in PDF Format:
Back to top... |
| CRH9 (export model)
Electric instantaneous water heater, hydraulically controlled with tubular heating system for supplying hot water between approx. 35 °C and 55 °C to one or two points of use. The appliance automatically switches on when the required minimum flow pressure is exceeded and transfers its thermal energy to the water flowing through. The temperature of the hot water can be influenced via the draw-off fitting by increasing or decreasing the flow rate. A thermal cutout protects the appliance against overheating.
Description
- Compact, hydraulically controlled instantaneous water heater
- Tubular heating element in copper tank
- Closed outlet (pressure-type) design with safety temperature limiter and monitor
- Integrated shutoff valve with easy-to-service strainer and flow control
- Variable electrical connections
- Variable water connection for surface-mounted or flush-mounted installation
Use
- For export markerts
- For solitary wash basins (CRH 3)
- For singlepoint or multipoint use at wash basins, sinks
Example of installation for one point of use Under-table installation with optional piping kit UCX (Art. No. 2400-25010) directly connected to the piping of the sanitary fitting.
T-piece, copper piping with dia. 10 mm and service valve to be provided by customer.
Product Information Sheet in PDF Format:
Back to top... |
| S10 Storage Water Heater
Small electric water storage heater with pressure-type internal
tank of corrosion-proof copper for supplying hot water between
approx. 35 °C and 80 °C to one
point of use. The appliance can be installed either as a vented unit in combination
with an open-outlet fitting or as an unvented unit in combination with a corresponding
relief valve. The water in the storage heater is automatically maintained at
the infinitely variable, preset temperature by a controller. High-grade thermal
insulation ensures low energy consumption in standby mode.
Description
- Small electric water storage
heater with 10 litres capacity, unvented design
- For
under-table (S10-U) or above-table (S10-O) installation
- Corrosion-proof internal copper tank with recyclable
CFC-free thermal insulation
- Frost protection
- 3-stage
temperature lock of the selector range
- Power
cable approx. 65 cm long, with standard European plug
- S10/EKM comes with a vented single lever mixer
Use
-
Solitary points of use, such as kitchen sinks
Appliance dimensions (cm) H45.2 X W30 X
D28.5
Type & Capacity:-
S10-U - 10 Litre,
2,2 kW
S10/EKM - 10 Litre, 2,2 kW
NOTE: You will require the addition SGU Undersink Safety Kit if you are not using an EKM Vented mixer.
Product Information Sheet in PDF Format:
Back to top... |
| DEX ELECTRONIC MPS® (electronically controlled)
Electronically controlled instantaneous water heater for supplying hot water in a comfortable and economic way. The power consumption is controlled by the electronic in accordance with the ambient temperature and flow rate up to the capacity in order to obtain precisely the set outlet temperature and to keep it constant. The required value can be entered between 20°C and 60°C via touch keys and is shown on the large display indicating also the function and service menu. The maximum power rating (18–27 kW) can be determined when the appliance is installed
Description
- Fully electronically controlled instantaneous water heater with bare wire heating system IES®
- Precise outlet temperatures due to TWIN TEMPERATURE Control TTC® up to the capacity of the appliance
- Attractive, very slim design
- Electronic safety system with temperature and pressure cutoff
- Compatible with solar heating systems
- Easy installation with variable connection possibilities
- Multiple Power System MPS®: Power rating can be limited to 24 kW, 21 kW or 18 kW when installing the appliance
- Optional remote control module available
Use
- Singlepoint or multipoint use, e.g. bath, shower, sink or wash basin
Comfortable control panel with touch keys
Control panel with large LCD-display to enter precise outlet temperatures between 20°C and 60°C .
Two programme buttons for individual set values, activation of temperature limit as well as indication of function and service menu.
Appliance dimensions (cm) H46.6 X W23.1 X
D9.7
Type & Capacity:-
DEX - 18 kW..27 kW (26A..39A), 400V, 3P, 2,5 – 8,0 l/min)
Product Information Sheet in PDF Format:
Back to top... |
| ENM
Fitting for small and compact
open-outlet instantaneous water heaters
-
Single lever mixer, available with
pop-up waste set
Vented mixer ENM can only be used with one heater only i.e one outlet only.
Back to top... |
| EKM
Fitting for small and compact
open-outlet instantaneous water heaters
- Open-outlet
single lever mixer
with long spout e.g. for the kitchen sink
Back to top...
|
| D40015
Self closing tap 6-8 seconds
Back to top...
|
| D40010
Self closing tap 6-8 seconds
Back to top...
|
| D40010M
Self closing tap with Hot/Cold selector 6-8 seconds
Back to top...
|
| MDH6/D40015
5.7kW Heater with self closing tap
Back to top...
|
| CRH9/D40015
8.8kW Heater with 2 x self closing taps
Back to top...
|
| MDH6/D40010
5.7kW Heater with self closing tap
Back to top...
|
| CRH9/D40010
8.8kW Heater with 2 x self closing taps
Back to top...
|
| MDH6/D40010M
5.7kW Heater with self closing tap
Back to top...
|
| CRH9/D40010M
8.8kW Heater with 2 x self closing taps
Back to top...
|
| DEX Remote Control
The wireless remote control provides comfortable handling of
the electronic instantaneous water heater DSX resp. DEX if the
water heater is not installed in the immediate vicinity of the tap
connection. It can be attached on the wall or positioned loosely
and allows a temperature selection of the instantaneous water
heater over a distance of 30 m inside the building additionally
to the selection on the heater display. Up to four remote control
devices can be run with one instantaneous water heater.
Back to top...
|
|
SGU Under Sink Safety Kit for S10
Under-table relief valve with non-return valve, pressure reducer and flexible connecting hoses for unvented installation with the S10.
Back to top... |
|
